About Us

About us




Company EuroStars Trading Ltd. is a trading company based on its Foundation Charter, organized and validly existing

under the laws of HONG KONG & THE UNITED KINGDOM. EuroStars Trading Ltd. trades with crude oil and petroleum products, such as JP-54, Jet A1, D2, and Mazut (M100).


In the past, EuroStars Trading Ltd. used to deal with various commodities such as sugar (beet, cane, raw), crude oils for

bio-diesel (corn oil, jatropha oil, crude degummed rapeseed oil, soybean oil, sunflower oil), refined edible oils (sunflower oil,

soybean oil, palm oil, corn oil, olive oil), cement, UREA, iron ore, bitumen, cement and more.


We focus exclusively on petroleum products (crude oil, D2, Mazut, Jet Fuel, Gasoline, LPG) as it consumes all of our time.

The commodity trading industry is also complicated because of fictive demands and supply shortages. We have approached

this problem from a long term prospective and have therefore sought and acquired supply sources that are reputable and stable.


We have several reliable Suppliers, who have different procedures, pricing, delivery and payment terms, so qualified Buyers

may choose most suitable one. These procedures, however, are NON-NEGOTIABLE and the Buyer has to accept the way our Sellers operate, if they wants to go ahaed with us. For more information about specific sellers, procedures, pricing etc, do not hesitate to contact us through our 'CONTACT US' section or via : info@eurostarstradingltd.com

Success of our company is driven by its employees and their commitment to get positive results the right way – by operating effectively, responsibly and reliably as well as by communicating promptly and honestly. Our practice is built on:


Integrity       Balance             Support      Partnership       Communication        Strength


Trust        Performance       Discipline       Honesty                Reliability        Professionalism


Strict adherence to Integrity in everything what we do and commitment to this set of principles has helped us to establish

successful and long-lasting business relationships with our Sellers and Buyers across the world. We are with our clients

before, during, and after closing of a successful transaction. We striclty adhere to international rules and procedures including INCO-Terms 2010 and ICC Chamber. We act as mandates intrducing Strong Sellers to Qualified Buyers.


Notice: Company EuroStars Trading Ltd. always requires direct contact between the seller and the end-buyer. Contracts are always signed between the buyer and the seller/legal title holder.



Petroleum products:

The word Petroleum is derived from two words “Petra” meaning rock

and “Oleum” meaning oil. The oil which occurs naturally in porous

rocky strata in liquid form is the crude oil. If it is in semi hard state

mixed in sand then it is bitumen. The crude oil can be black, brown,

green or even orange to yellow. It contains oxygen, sulphur, nitrogen

and other items in minute quantities which determines it suitability for

a specific application. The crude oil or its derivatives are marketed by

volume (by gallon, litre or barrel) or weight (by metric tonnes ~ MT).

The co-relation between 7.2 to 7.4 barrels to 1 MT is taken for rough

calculation only as is it not precisely accurate.




D2 is a refinery abbreviation for Gasoil. It is the second distillate fromthe crude oil, and can be used without reformers and additives. So, the first engines used D2 as fuel - before petrol cars as we know them today was invented. That is because the engine invented by a German called Diesel, requires no spark plugs. The diesel engine will ignite and combust when the pressure increases so that the heated "plug" makes it explode. Here we get the name "Diesel" - since the same principles are used in diesel engines today. However, automotive diesel that you fill has additives that the refinery will add to make the engine more efficient and also easier to start in the winter. Diesel changes "flash point" in the winter. It also has additives to absorb water that condense. If you use summer diesel in the winter, you will get better mileage, but your fuel pipes may freeze and can also burst, and the wax makes the diesel flow thicker.


The principal difference between GASOIL and D2 is the content of sulphur. Just 10 years ago, the US EPA introduced a limit of 4% sulphur in the GASOIL, whereas Europe and the rest of the world followed later. As in most other cases, when you first have to remove the sulphur, it was soon discovered ways of doing this more efficient. Then it was discovered that the

sulphur, as sulphuric acid, could be traded with a good profit - which now is the motivator for extracting as much as possible.


So "Low sulphur Gasoil" is no longer 4 percent - but below 0.2 percent. Then we have a new, "Ultra Low Sulphur" at 0.02% at the most, and the limit here is :

   (a) that mass spectographs requires extensive calibration to measure below 1000ppm. and,

  (b) sulphur has a way to form clogs - the molecules binds to free hydrogen molecules and form a cluster of molecules that   will break if "cracked" by the refinery, but as explained above, D2 is a distillate and has not been "cracked".


ISO has a standard for D2 that most of oil companies use as their reference. In the U.S. it is ANSI that has defined the US national standard for D2, according to proposals from the ASTM, API and EPA. In Europe there are similar national variants, e.g. in Germany set by DIN, and in Russia by GOST.


The GOST variant for D2/Gasoil is GOST 305-82 and specifies now a sulphur content of 0.02 MAX which is according to the ISO standard. However, the ANSI standard will call this "Ultra Low Sulphur", and retain 0.2% (2000ppm) as the "Low sulphur”. The reduction of sulphur in the Gasoil used for heating has contributed to less pollution in many cities.


Automotive diesel has national variants - but the usual variants traded are EN590 and EN560 which are specified by ISO in

Paris. These qualities may be sold in the U.S., and be compliant with EPA regulations in the U.S. Automotive diesel is now

tested in planes with great success, where you get greater mileage per weight unit of fuel - as much as 40% increase. In these

days, when no stone remains unturned to reduce emissions, one outcome may be that planes will fly on Gasoil and not kerosene. The problem is condensate / ice particles and wax that may cause the jet engine (which is a turbine) to be completely destroyed. A preliminary solution is to heat the gasoil before injection, and pass it through an electrostatic filter.




Is a transparent petroleum-derived liquid that is primarily used as a fuel in internal combustion engines. It consists mostly of

organic compounds obtained by the fractional distillation of petroleum, enhanced with a variety of additives. Some gasoline

also contain ethanol as an alternative fuel.


Gasoline is a complex mixture of relatively volatile hydrocarbons that vary widely in their physical and chemical properties. The fuel properties must be balanced to give satisfactory engine performance over an extremely wide range of operating conditions. The prevailing standards for fuel represent compromises among numerous quality, environmental, and performance requirements. Anti knock (octane) rating, distillation characteristics, vapour pressure, sulphur content, oxidation stability, corrosion protection, and other properties are balanced to provide satisfactory vehicle performance. Additives are often used to provide or enhance specific performance features.


Jet fuel


Jet fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 which are produced to a standardized international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation

is Jet B which is used for its enhanced cold-weather performance.


Jet fuel is a mixture of a large number of different hydrocarbons. Kerosene-type jet fuel (including Jet A and Jet A-1) has a

carbon number distribution between about 8 and 16 carbon numbers (carbon atoms per molecule); wide-cut or naphtha-type jet fuel (including Jet B), between about 5 and 15 carbon numbers.




Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. In the United States and Western

Europe, mazut is blended or broken down, with the end product being diesel. Mazut-100 is a fuel oil that is manufactured to

GOST specifications, for example GOST 10585-99. Mazut is almost exclusively manufactured in the Russian Federation,

Kazakhstan, Azerbaijan, and Turkmenistan. The most important thing when grading this fuel is the sulphur content.


Mazut 100-75 VLS and Mazut 100-99 Grade I are actually the same thing. GOST merged the old classifications of 75 and 99

into a new seven grade classification, all under 100-99. For whatever reason, many people still use the old 75 classification; particularly the Chinese.


The grades are represented by these sulphuric levels:


”Ultra Low Sulphur” is mazut with a sulphur content of 0.5%

”Low Sulphur” is a mazut with a sulphur content of 0.5-1.0%

”Normal Sulphur” is a mazut with a sulphur content of 1.0-2.0%

”High Sulphur” is a mazut with a sulphur content of 2.0-3.5%.




EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union,

Croatia, Iceland, Norway and Switzerland.


The EN590 had been introduced along with the European emission standards. With each of its revisions the EN590 had been adapted to lower the sulphur content of diesel fuel - since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives).


The quality of European diesel fuels is specified by the EN590 standard. While these specifications not are mandatory, they

are observed by all fuel suppliers in Europe.


Automobile diesel EN590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of

European Standard EN590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile

EN590 are offered: Grade C - limiting filterability temperature -5 ° C; Grade D - limiting filterability temperature -10 ° C;

Grade E - limiting filterability temperature - 15 ° C; Grade F - limiting filterability temperature -20 ° C. The entire

volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.


Ultra-low-sulfur diesel (ULSD)


Ultra-low-sulfur diesel (ULSD) is diesel fuel with substantially lowered sulfur content. As of 2006, almost all of the petroleum-based diesel fuel available in Europe and North America is of a ULSD type. There is not a single standard set of specifications and as the government mandated standard becomes progressively more strict so does the definition.


The move to lower sulfur content is expected to allow the application of newer emissions control technologies that should substantially lower emissions of particulate matter from diesel engines. This change occurred first in the European Union and is now happening in North America. New emissions standards, dependent on the cleaner fuel, have been in effect for automobiles in theUnited States since model year 2007.


ULSD has a lower energy content due to the heavy processing required to remove large amounts of sulfur from oil, leading to lower fuel economy. Using it requires more costly oil.


European Union:


In the European Union, the “Euro IV” standard has applied since 2005, which specifies a maximum of 50 ppm of sulfur in diesel fuel for most highway vehicles; ultra-low-sulfur diesel with a maximum of 10 ppm of sulfur must “be available” from 2005 and was widely available as of 2008. A final target (to be confirmed by the European Commission) of 2009 for the final reduction of sulfur to 10 ppm, which will be considered the entry into force of the Euro V fuel standard. In 2009, diesel fuel for most non-highway applications is also expected to conform to the Euro V standard for fuel. Various exceptions exist for certain uses and applications, most of which are being phased out over a period of several years. In particular, the so-called EU accession countries(primarily in Eastern Europe), have been granted certain temporary exemptions to allow for transition. Certain EU countries may apply higher standards or require faster transition. For example,Germany implemented a tax incentive of per litre of "sulphur free" fuel (both gasoline and diesel) containing less than 10 ppm beginning in January 2003 and average sulphur content was estimated in 2006 to be 3-5 ppm. Similar measures have been enacted in most of the Nordic countries, Benelux, Ireland and the United Kingdom to encourage early adoption of the 50 ppm and 10 ppm fuel standards.

Copyright © 2013 - 2020 eurostarstradingltd.com. All rights reserved.